More functions for the CDX-1
Using an insert effect
1. Press INSERT EFFECTS [ON/OFF].Insert effects can be used on a
[ON/OFF] will light, and the sound processed by the effect will be output.specific audio track during
playback, or during mixdown
2. Press INSERT EFFECTS [PATCH].(p. 133). ? Refer to OChanging
fig.5-04the insert effect connections�
The patch select screen appears.(p. 144).
3. Turn the TIME/VALUE dial to select a patch.
If you use CURSOR [] to
When you switch patches, the effect sound will also change. While you listen to the select OGROUP,O then turn the
effect sound, select the desired effect patch.
TIME/VALUE dial, patches
4. If you do not wish to use an insert effect, press INSERT EFFECTS [ON/OFF] once can be changed by groups.
again.
[ON/OFF] will go out, and the insert effect will be off.
Editing the insert effect settings
If you wish to create a new effect sound, you should first select an existing patch that
is closest to the sound you want, and then edit its settings. If you wish to save the
effect settings that you edited, save them as a user patch or song patch.For further descriptions of
each aigorithmOs function,
1. Press INSERT EFFECTS [PATCH].please refer to p. 175�203.
The patch select screen appears.
2. Turn the TIME/VALUE dial to select a patch that is close to what you intend to
create.
fig.5-05
3. Press CURSOR [] to select OEDIT.�
4. Press [YES/ENTER].
The effect block diagram is displayed
graphically.
fig.5-06e
5. Use CURSOR [] [] [] [] to Effect on (solid line)Effect off (dotted line)
select an effect, and turn the TIME/VALUE
dial to turn the effect on/off.
6. Use CURSOR [] [] [] [] to select the effect whose parameters
you wish to edit, and press [YES/ENTER].
The parameter setting screen for the selected effect will appear.
7. Use CURSOR [] [] to select a parameter, and turn the TIME/VALUE dial
to edit the value.
8. If you would like to edit another effect, press [NO/EXIT] to return to the previous
screen, and repeat steps 5�6.
fig.5-05If you wish to save the current
* Edited effect settings are temporary. If you go back one screen effect settings, perform the
without saving the edited patch, the patch number will be procedure described in
displayed as OTMP.� While OTMP� is displayed, newly OSaving insert effect settings,�
selecting a different patch will cause the edited patch to revert to below.
its previous state, and your edits will be lost.
142 |