CUBE-15X_e.book 5Z8 ???-??e?xýe
Uxý9=??p?Â
104109a
Y Try to prevent cords and cables from becoming Y Before cleaning the unit, turn off the power and
entangled. Also, all cords and cables should be unplug the power cord from the outlet.
placed so they are out of the reach of children.
..........................................................................................................
..........................................................................................................110a
106
YNever climb on top of, nor place heavy objects on the unit.Y Whenever you suspect the possibility of lightning
in your area, pull the plug on the power cord out
of the outlet.
....................................................................................................................................................................................................................
107a119
YNever handle the power cord or its plug with wet hands Y The cooling vents on either side of the unit may
when plugging into, or unplugging from, an outlet.become hot, so take care to avoid burns.
..........................................................................................................
..........................................................................................................121
108a
Y Before moving the unit, disconnect the power Y Do not remove the speaker grille and speaker by
any means. Speaker not user replaceable. Shock
plug from the outlet, and pull out all cords from hazardous voltages and currents are present
external devices.
inside the enclosure.
..........................................................................................................
IMPORTANT NOTES
291b
In addition to the items listed under OIMPORTANT SAFETY INSTRUCTIONS� and OUSING THE UNIT SAFELY� on pages 2,
3, 4 and 5, please read and observe the following:
Power SupplyAdditional Precautions
301553
Y Do not connect this unit to same electrical outlet that is Y Use a reasonable amount of care when using the unitOs
being used by an electrical appliance that is controlled by an buttons, sliders, or other controls; and when using its jacks
inverter (such as a refrigerator, washing machine, and connectors. Rough handling can lead to malfunctions.
microwave oven, or air conditioner), or that contains a 556
motor. Depending on the way in which the electrical Y When connecting / disconnecting all cables, grasp the
appliance is used, power supply noise may cause this unit connector itselfNnever pull on the cable. This way you
to malfunction or may produce audible noise. If it is not will avoid causing shorts, or damage to the cableOs
practical to use a separate electrical outlet, connect a power
internal elements.
supply noise filter between this unit and the electrical outlet.557
307Y A small amount of heat will radiate from the unit during
Y Before connecting this unit to other devices, turn off the
power to all units. This will help prevent malfunctions normal operation.
558a
and/or damage to speakers or other devices.Y To avoid disturbing your neighbors, try to keep the unitOs
308
Y Although the LEDs are switched off when the POWER volume at reasonable levels. You may prefer to use
headphones, so you do not need to be concerned about
switch is switched off, this does not mean that the unit has
been completely disconnected from the source of power. If those around you (especially when it is late at night).
you need to turn off the power completely, first turn off 559a
Y When you need to transport the unit, package it in the box
the POWER switch, then unplug the power cord from the
power outlet. For this reason, the outlet into which you (including padding) that it came in, if possible. Otherwise,
you will need to use equivalent packaging materials.
choose to connect the power cordOs plug should be one
that is within easy reach and readily accessible.562
Y Use a cable from Roland to make the connection. If using
some other make of connection cable, please note the
Maintenance
following precautions.
401a
Y For everyday cleaning wipe the unit with a soft, dry cloth Y Some connection cables contain resistors. Do not use
or one that has been slightly dampened with water. To cables that incorporate resistors for connecting to this
remove stubborn dirt, use a cloth impregnated with a unit. The use of such cables can cause the sound level
mild, non-abrasive detergent. Afterwards, be sure to wipe to be extremely low, or impossible to hear. For infor-
the unit thoroughly with a soft, dry cloth.mation on cable specifications, contact the manufac-
402turer of the cable.
Y Never use benzine, thinners, alcohol or solvents of any kind,
to avoid the possibility of discoloration and/or deformation.Y Wrap the power cord around the cord hook when trans-
porting or storing the unit.
5 |