PD/CY/KD/FD-8_e 7 Z8 ??????e?xý~
Uxý9 V?p??Â
CY-8
1.Use the included connection cable and connect Edge Shot
the output jack of the CY-8 to the trigger input This playing method involves striking the edge with the
jack of the percussion sound module.shoulder of the stick. It corresponds to the sound of the Orim-
Connect the L-shaped plug of the included cable to the CY-side� of the connected trigger input.
8. This will prevent strain from being applied to the CY-8.
To make use of edge shot, youOll need to connect to a
To make use of edge shot and choking play techniques, trigger input jack on the percussion sound module that
youOll need to connect to a trigger input jack on the accommodates rim shots.
percussion sound module that accommodates rim shots.
Edge
2.Leave some slack in the cable to ensure that they are
not pulled by the movement of the CY-8 when struck.
fig.CY04a.e
Choking
Choking (pinching) the cymbalOs edge with the hand
immediately after hitting the cymbal makes the sound stop.
Leave some slack
in the cable
3.Make the trigger settings for the percussion sound To make use of choking play techniques, youOll need to
module. For the recommended values, refer to p. 12.connect to a trigger input jack on the percussion sound
module that accommodates rim shots.
Should you neglect to make the appropriate settings for
the percussion sound module, you could likely experience
the following problems:
Y Sometimes it does not sound (uneven volume)
Y The volume is too low (reduced sensitivity)
For information on how to change the parameters for a Specifications
percussion sound module, refer to the documentation for
the percussion sound module youOre using.CY-8: Cymbal Pad
Pad Size:12 inches
Triggers:2 (Bow, Edge)
Playing the CY-8
Dimensions: 290 (W) x 295 (D) x 45 (H) mm
11-7/16 (W) x 11-5/8 (D) x 1-7/8 (H) inches
Bow Shot
Weight:650 g / 1 lb 7 oz
This is the most common playing method, playing the pad face
Accessories: OwnerOs Manual, Connection Cable, Wing Nut,
of the cymbal. It corresponds to the sound of the Ohead-side� of
Felt Washer, Stopper
the connected trigger input.
Options:Cymbal Mounts (MDY-7U, MDY-10)
Bow
Drum Stands (MDS-3C, MDS-6, MDS-8C,
MDS-10, MDS-20)
962a
In the interest of product improvement, the specifications
and/or appearance of this unit are subject to change without
prior notice.
7 |